If you know the place of your networks, it is better to implement them in your plan whether you are in new construction or renovation.
Washing and cooking systems
Before modeling your furniture, remember to place your kitchen networks.
This technical information will help you in your design, but above all it will help us to suggest the best place for each appliance (sink, dishwasher, oven, hob), when stretching your set of cabinets.
- The washing network:
This is the water inlet and outlet.
It will place your sink in the center of this network at the stretching of a low set of cabinets with sink.
(Other kitchen rules integrated into our configurator will then place the dishwasher near the sink, the sink under your window, etc...).
- The cooking network:
This is the electrical and/or gas inlet.
It will place your cooking plate in the center of this icon at the stretch of a low cabinet set with cooking plates.
(Other kitchen rules integrated into our configurator will also place the oven near the plates, etc...).
When a low cabinet is stretched over these pictograms, your kitchen equipment will be ideally placed.
How to place your networks?
In 2D mode, place your kitchen networks from the menu BUILD / KITCHEN NETWORKS: washing or cooking.
The icon must be placed in the center of your network.
To place it precisely, go over the pictogram and you will see the measurements about its position.
(Condition : In 2D, in the section “manage the display of elements” you need to select “measures on pointer”)
Note: These pictograms must be placed along the wall.
- a kitchen network placed in the wall or halfway up the wall will not affect the position of your equipment.
- a kitchen network placed on the wrong side of the wall will not affect the position of your equipment.
Caution: Only these two symbols affect the kitchen organization. The kazaswitch (electrical configurator) or the kazaplumb (plumbing configurator) have no impact on the placement of your kitchen equipment.
Tip: These pictograms are also visible in front view.
Please note: We automatically activate the locking of the cooking and/or washing cabinets when they have been positioned by a kitchen network, but you can still unlock it.